Hey Wild Whisper Fans, Katelyn here! For today's project, I've created this Coronavirus Tag will I will be adding to my Coronavirus Mini Album that I've started to create. To create my tag, you'll need the 6 Feet Apart Collection. Grab a cup of your favourite beverage and learn how to recreate my tag at home.
To start, you'll need a tag that measures 3 1/8" x 6 1/4". Pick a piece of patterned paper out of the 6 Feet Apart Paper Pack and trace the tag around the paper as well as mark the hole on the tag. Cut the tag out. Punch the hole out at the top of the tag. Distress the edges of the paper tag. Ink the edges of the paper tag using Black Soot Distress Ink and a blending tool with foam.
Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.
Pick another piece of patterned paper out of the 6 Feet Apart Paper Pack and cut a piece that measures 2 7/8" x 5 1/2". Distress the edges of the paper. Ink the edges of the paper using Black Soot Distress Ink and a blending tool with foam.
Pick a third piece of patterned paper out of the 6 Feet Apart Paper Pack and cut a piece that measures 2 5/8" x 5 1/4". Distress the edges of the paper. Ink the edges of the paper using Black Soot Distress Ink and a blending tool with foam.
Pick one more piece of patterned paper out of the 6 Feet Apart Paper Pack and die cut a reinforcement piece of out it. Ink the edges of the reinforcement using Black Soot Distress Ink and a blending tool with foam.
Choose two border strips from the bottom of two of the patterned papers out of the 6 Feet Apart Paper Pack. Cut one border strip down to 3 1/8". Cut the other border strip down to 3". Ink the edges of the border strips using Black Soot Distress Ink and a blending tool with foam.
From the 6 Feet Apart Card Pack, you'll need the cards that has the toilet paper all over it and the other that has the covid-19 & Coronavirus words all over it. Cut the toilet paper card down to 2 7/8" x 4". Cut the word card down to 2 5/8" x 3 3/4". Distress the edges of both cut cards. Ink the edges of both cards using Black Soot Distress Ink and a blending tool with foam.
From the 6 Feet Apart Ephemera Pack, choose seven word strips. Distress the edges of all of them. Ink the edges of all of them using Black Soot Distress Ink and a blending tool with foam.
Choose one flair out of the 6 Feet Apart Flair Pack.
Adhere the patterned paper tag to the tag. Adhere the reinforcement over top of the hole at the top of the tag.
Adhere the 2 5/8" piece of patterned paper to the 2 7/8" patterned paper. Adhere the 2 7/8" patterned paper to the tag.
Adhere the 2 5/8" card to the 2 7/8" card. Foam square the 2 7/8" card 7/8" from the bottom and right in the middle of the tag. Adhere the 3 1/8" border strip 1 1/8" from the bottom and all the way to the left hand side of the tag. Adhere the 3" border strip 1" from the bottom and all the way to the left hand side of the tag.
Adhere the word strips and Flair down to the middle of the tag
as desired.
Using Picket Fence Distress Spray Stain and a paint brush, splatter it randomly on the tag as desired.
Once the tag has dried, tie a piece of twine through the top of the tag.
Here are a few closeup photos of the finished tag.
Here is the finished Coronavirus Tag.
Wild Whisper Supplies Used:
Other Supplies Used:- Tim Holtz for Ranger Ink: Distress Ink - Black Soot, Distress Spray Stain - Picket Fence and Blending Tool with Foam
- Elizabeth Craft Designs: Reinforcement Variety Pack
- Misc: Tag and Twine
Thanks so much for joining me today! I hope that I’ve inspired you to recreate my Coronavirus Tag at home. Make sure to continue to stop by the blog as the design team has loads of inspiration for you!
